D16 Valve Covers Vented - $45 picked up / $55 shipped - Shaved - $20 picked up /$35 shipped
* One is vented w/ an fitting – don’t recall if it was a 6/8/10 fitting
* Great Condition
* Honda and Rough edges have been shaved
D16 Axles 92-00 $60 picked up / $100 shipped special
* Good Condition
* No worn or cracked seals
* No damaged axle rings
* Passenger and driver
GSR Rear Calipers w/ brkt. comes w/ free F & R rotors – needs turning (R = .33in thick) $50 picked up / $65 shipped special
* No damaged seals
* Fully working caliper set
* Ready to paint
* Great for disc brake swap
* All shims and hardware
* Does not come w/ brake lines
D-series XTD Stg4 Turbo/Nitrous/Drag clutch $125 picked up $135 shipped
* Barely Used 20miles max (body shop and back, then motor was pulled)
* Plenty meat left
* New condition
* D16 High HP clutch & psi plate
* Sprung 6 puck disc
D-series OEM Lightened Flywheel - z6 $100 picked up / $120 shipped
* Re-balanced
* Lightened to 12lbs
* Oem Steel Flywheel
D15/D16z6 & y8 Rage / Whitfield Performance Cam Gear $130 picked up / $140 shipped
* New never used
* Comes w/ cam key
* Fits y8 when using z6 cam
* Black or Dark Bronze in color
* Key for tuning aftermarket cams
* Hard to find product
D16z6/Y8 Vtec Delta Stg2 Turbo Cam - Aka 272 $140 Picked up / $150 shipped
* Freshly done, uninstalled since
* Safe for factory Valvetrain
* Makes 9hp & 18hp from 55-8300rpm
* Great condition cam
* Magnafluxed
* Reground for Turbo SOHC
* Intake- .394" lift, 216* duration @.50
* Exhaust- .370" lift, 210* duration @ .50
D16z6 BUILT Head $900 picked up / $1000 shipped special
* Fresh fully ported & Polished ($500)
* Complete Supertech valvetrain - valves, springs, retainers ($500)
* Bronze Valve Guides
* Valve seals
* Flat valves
* 3 angle valve seat
* Resurfaced
* Comes w/ LMA’s – can install w/ purchase of cam
D-series Eagle H-Beam Rods w/ SRP 9:0.1 Turbo Pistons $335 picked up / $350 shipped
* Will NOT separate
* Great for turbo upgrade
* H-beam d16 rods
* Will supply New Eagle Rod Bolts
* SRP Turbo Nitrous Pistons
* Used in mint Condition
* Needs New rings
* Great for FI/Nitrous/ All-Motor applications
D16z6 Block (bottom end) $450 picked up / $550 shipped special
* Under 90k
* ARP Head Studs ($95)
* Beautiful shine, clean hand polished by me
* KMS Block Guard (Was $80+ shipped)
* New OEM H20 Pump ($60)
* New OEM Oil Pump ($129)
* New OEM Strainer + gasket ($33)
* New OEM Oil pan gasket ($19)
* New Main Seal ($30)
* Oil Pan tapped for Turbo
* Oem Pistons and Rods
