vtec engaging

**sdlEF** · #1 (**permalink**) 10-17-2007, 06:10 PM

hey anyone have any ideas to check to see if vtec is kicking in? it doesnt feel like vtec doesnt kick in my mini me. i got the computer and the obd I conversion for my ZC sohc with Y8 head and intake manifold.

JDM_B18 · #2 (**permalink**) 10-17-2007, 06:38 PM

u should feel at least a small difference in power when it engages.If u can check the soleniod to see if it clicks when u ground it.Also do u have enough oil as well?

INJEN200 · #3 (**permalink**) 10-17-2007, 07:06 PM

check your "VTEC JUICE"
and you can also wire in a vtec light so when it hits the light comes on..just get an L.E.D and ground it then splice the positve into the vtec wire from the sol..but make sure you dont just cut it and connect to the l.e.d

**sdlEF** · #4 (**permalink**) 10-18-2007, 02:03 PM

yeah it clicks so its good i probably will get a vtec
led light hooked up

INJEN200 · #5 (**permalink**) 10-20-2007, 11:00 AM

yea im putting one on my 91 si hatch as soon as i get the vtec head..because its good to know if vtec is working or not

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VTEC not engaging HELP!	Mcoupes52	JDM Universe	4	04-19-2007 02:49 AM
How To Make A Vtec Indicator In An Ef9 Cluster	clengster_77	How To's & Tutorials	5	05-08-2005 04:33 AM
vtec pressure switch and ground?	Integra_DA6	General Tech	3	07-20-2004 03:40 AM
VTEC not engaging on my 2nd gen B16A	SPOON FED EJ2	General Tech	9	10-26-2003 04:44 PM
CRX Si... POSSIBLE VTEC ON D16A6	HybridCRX	Honda Civic CRX EF 1984-1991	10	12-10-2002 12:19 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)