jdm yellow fog lights

[kamsEG]

I am looking to buy the jdm fog lights. Which ones do you recommend? I have found a bunch on Ebay for around $30. I have also found some on password jdm for $130 and some on jdmcarboy for $90. I want something that is going to be reliable and look and fit good. Are the ebay cheapys worth the money? also, how do you install these things. do you cut out the plastic where the holes are and then hard mount them in? Any help will be appreciated!

[ef legacy]

Originally Posted by kamsEG

I am looking to buy the jdm fog lights. Which ones do you recommend? I have found a bunch on Ebay for around $30. I have also found some on password jdm for $130 and some on jdmcarboy for $90. I want something that is going to be reliable and look and fit good. Are the ebay cheapys worth the money? also, how do you install these things. do you cut out the plastic where the holes are and then hard mount them in? Any help will be appreciated!

hey man, never buy any ebay crap they make for your car, its a waste of time and money, i personally bought mine from password jdm, they are the OEM Stanley pieces that belong on your car.

when you buy them they should come with some sort of wiring harness or at least some pig tails.

yes you will have to pull off you bumper and locate the pre notched marks of where you need to cut out. TAKE YOUR TIME please. PM me if you need any more help with the wiring bro, also you should also pick up a fog light switch from them if you can, if not, they can be wired other ways.

[92hatch]

dont buy the ebay ones the fir like shit. the ones on passwordjdm are depo and are ok they fit good but are not very bright. the oem ones are the best way to go they fit great and are alot brighter then the depo ones on pwjdm but they are also a couple hundred bucks. but deff worth the extra money if you ask me. i have a set of pwjdm fogs that im gonna replace with oem ones sometime soon.

[kamsEG]

so I think I am going to go with the passwordJDM lights. how hard is it to take off the bumper? and does anyone know where I can get a used stock headlight housing for cheap?

[ef legacy]

Originally Posted by 92hatch

dont buy the ebay ones the fir like shit. the ones on passwordjdm are depo and are ok they fit good but are not very bright. the oem ones are the best way to go they fit great and are alot brighter then the depo ones on pwjdm but they are also a couple hundred bucks. but deff worth the extra money if you ask me. i have a set of pwjdm fogs that im gonna replace with oem ones sometime soon.

i think you got screwed on yourfogs bro, mine from passwordjdm are OEM Stanley fogs. and they are plenty bright. even still brighter lights are just a HID kit away.

[kamsEG]

that sucks for him!

Originally Posted by ef legacy

i think you got screwed on yourfogs bro, mine from passwordjdm are OEM Stanley fogs. and they are plenty bright. even still brighter lights are just a HID kit away.

[kamsEG]

is the bumper a pain to remove?

[superman3234]

no sir bumper isnt hard to remover at all.. u have the two bolts where the bumper connects to your fenders on each side.. and then u have all the top screws that u can take of with a phillips screw driver on top of where like the hood is between each headlight.. doesnt take long at all to remove it and put it back on

[kamsEG]

Originally Posted by superman3234

no sir bumper isnt hard to remover at all.. u have the two bolts where the bumper connects to your fenders on each side.. and then u have all the top screws that u can take of with a phillips screw driver on top of where like the hood is between each headlight.. doesnt take long at all to remove it and put it back on

Nice! Sounds simple. I sure it is. Thanks for the tip. Where exactly are the two bolts at? Do I reach them from under the car, wheel well, or under the hood. Picture would be nice if you can? Thanks again!

[92hatch]

Originally Posted by kamsEG

Nice! Sounds simple. I sure it is. Thanks for the tip. Where exactly are the two bolts at? Do I reach them from under the car, wheel well, or under the hood. Picture would be nice if you can? Thanks again!

the two bolts in the fenders are in the wheel well behind splash guard there are two philips screws there are also or should be two 10mm bolts on the bottom of the bumper.. it will take you 5 minutes to get the bumper off...

[MickCollinsb16b]

password jdm.

[jamincivic]

Originally Posted by kamsEG

does anyone know where I can get a used stock headlight housing for cheap?

I got JDM Stanley headlights for your EG if you need them. Check my sig.

[kamsEG]

I bought a brand new pair from PWJDM on sale for $89 free shipping.

Now I just have to find the time to put them in. Does anyone have any good tips or instructions? Maybe some pics? And is there anything problems that I should ahead of time that I might encounter or some must have tools or supplies for the install? All the help would be greatly appreciated! Thanks everyone!!!

Also got the side markers so any tips with that install is helpful as well.

[kamsEG]

Came in the mail today





The side markers look different than the ones I've installed before. Probably because these ones are OEM not cheapys. So does anyone know the easiest way to cut the holes and does anyone have a wiring harness set laying around. I didn't know I had to buy one.

[ProjectJdmNYc]

Originally Posted by kamsEG

I am looking to buy the jdm fog lights. Which ones do you recommend? I have found a bunch on Ebay for around $30. I have also found some on password jdm for $130 and some on jdmcarboy for $90. I want something that is going to be reliable and look and fit good. Are the ebay cheapys worth the money? also, how do you install these things. do you cut out the plastic where the holes are and then hard mount them in? Any help will be appreciated!

i have a used set made by stanley $130 with no switch plus shipping OEM