Need help JDM H22 into a BB6

[Bad1Flip]

I recently bought a 2000 BB6 prelude shell for $1k with a blown motor. I bought a 94 J-spec H22 recently from Prolink Japan. I need to know whats needed to get the motor to work with the obd2 harness and for everything to work, basically. Thanks in advance for any replies

[mugencrx]

the motor is obd-1 if im not mistaking and the car is obd2 you will need the conversion harness available at www.hasport.com as far as I know this is all u will need since you bought the complete swap, which means u have the axles and tranny you should be good to go

[Bad1Flip]

Thanks for the reply. Honestly im on a budget because my hatch with a h22 was stolen, so im trying to keep this harness and keep it obd2. Well from what I've heard from several people is that just the obd2 fuel rail and distributor need to be swapped over from the A4 onto the JDM H.

[mugencrx]

I have never heard of having to swap the fuel rail but defintely will need the distrubutor. goodluck!