![]() |
|
|||||||
| Home | Forums | Register | FAQ | Members | Calendar | Gallery | Advertise | Shop | YouTube | Arcade | Search | Today's Posts | Mark Forums Read |
| JDM Universe This is for general CAR RELATED talk and chit chat. |
| Notices |
![]() |
|
|
LinkBack | Thread Tools | Translate | Search this Thread |
|
||||||||||||||
|
you can get them from any integra 90-01. they are all the same. also you can get them from a 90-91 crx si, 99-00 si, 92-95 si, or del sol si. again, all of these are exactly the same.
parts you will need. complete rear brake assembly including calipers, rotors, and soft lines that go from the caliper to your hardlines. then you will need the integra parking brake cables. here's a quick rundown of what you'll need to do. 1) Loosen 10mm nut that connects the hard brake line to the soft brake line using a 10mm line wrench. 2) Remove retaining clip that keeps soft line in place with a pair of channel locks. 3) Remove bolts and remove clip that connects the parking brake cable to the drum brake assembly. (do not lose the clip because they are small and easy to misplace and if you didn't get one with your rear disc assembly then you will need it as a replacement.) 4) Remove bolt that connects the rear trailing arm to the upper control arm. 5) Remove bolt that connects the rear trailing arm to the lower control arm. 6) Remove two 17mm bolts that attatch the pin that goes through the rear trailing arm bushing to the chassis. 7) Remove bolt that connects the rear trailing arm to the compensator arm. this is the bolt that is closest to the front of the car. DO NOT UNBOLT THE COMPENSATOR ARM FROM THE CHASSIS. if you do you will have to get an alignment. if not then your alignment will be fine. 8) Remove parking brake console and remove parking brake cables from parking brake and push them through the frame. 9) Find all bolts that connect the parking brake cable to the chassis and remove. to reinstall, just do everything backwards. afterwards you will obviously need to bleed your rear brakes. I think that pretty much covers everything. if anyone has anything else to add please do so. Last edited by efrue57; 01-13-2009 at 11:40 PM. |
|
|||||||||||||||
|
Quote:
__________________
![]() ![]() ![]() ![]() ______Check out my DC5 Build Thread_______ http://www.jdmuniverse.com/for....html |
![]() |
| Bookmarks |
| Tags |
| brakes, crx, disc, drum |
| Sponsored Links |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| EF Front disc brakes ? | jdm_da9 | Honda Civic CRX EF 1984-1991 | 23 | 01-07-2009 07:45 PM |
| rear drum to disc conversion | bambue29 | Honda Civic - Del Sol EG 1992-1995 | 2 | 06-17-2007 02:11 AM |
| 91' crx rear disc brakes | LoveOfMoney | Honda Civic CRX EF 1984-1991 | 12 | 01-27-2007 07:00 PM |
| My newest "Project": RIP CRX | schwanginpt | Honda Civic CRX EF 1984-1991 | 26 | 09-03-2006 11:27 AM |
| Rear disc brakes on a 6th gen. EX | ProjectCB7 | Honda Civic EK 1996-2000 | 7 | 11-23-2003 10:11 PM |