Im new to this site, a mate of mine just recomended it to me, so i thought i would post up some details of my Project "EGx" Civic hatchback!
Its a 1991 EG3 Dx (1.3 SOHC) UK spec car, this project is to create my "dream" / "prefect" EG Civic hatchback track car, using some of the best parts honda made as std from many models. This is NOT an exercise in fitting as many JDM parts/ going "JDM stylee" or any other B/S im just making in my eyes my "prefect" car using parts i like visualy or parts i know will improve the car.
Over the Course of june the car will be rebuilt, and i shall be keeping a daily update of progress... and not so progress :lol: so pls do visit my "blog" theres not a heck of alot to see so far, but check back as the project will be getting properly underway from next monday (the 5th)!
Also pls start form the post at the bottom and work upwards - it will make more sence
http://project-tamama.blogspot.com/ <---- Click here to visit my blog and check on the progress!
Spec list:
Engine/Performance
Engine:
B16B EK9 Engine and gear box
1.6L DOHC
Flywheel : 185PS as std
Torque : 118Lb/Ft as Std
Weight: 900KG (TBC its what im aiming for tho)
Weight Distribution (Front/Rear): ???/???kg
Theoretical Power to Weight: 205.55bhp/ton
And 115.62bhp/Litre
Mods:
K&N Pannel Filter with modded Std Air box
Exhaust all 2.5 inch JDM spec -
EK9 Exhuast Manifold
JDM Cat
Spoon Centre Section
Spoon N1 Back Box - 108 DB @ 4.5K rpm
Spoon N1 Bung - 99.5DB @ 4.5K rpm
Magencor KV85 8.5mm Competition ignition leads.
HKS Super Fire Spark Plug S45
Carbon/Kevlar plug cover.
Std Type-R Oil Cap
ITR Full Width Radiator
Spoon Radiator Cap
Spoon Reservoir Covers
Greddy/Trust "sandwich" plate.
Suspension/Handling/Wheels/Brakes
Suspension/Hubs/Steering:
Std ITR Sunpension
5 Stud ITR hubs front and rear
ITR steering rack - 2.5-2.75 turns lock to lock
Chris_Gee inc. Power steering removal kit
Handling:
ITR Front 24mm A/R bar with white line bushes
Std Rear 16mm A/R bar
Std ITR Front upper Strutbrace
Front sub frame with EG6 Lower brace
Wheels:
Track: Standard White Honda Integra Type-R 98 spec 15's
Road: Standard White Honda Civic Type-R 98 spec 15's
Brakes:
Front Calipers: OEM NSX (Red)
Front Disks: 282mm Black Diamond
Front Pads: AEM NSX Road Pads
Front Lines: Goodridge SS
Rear Calipers: OEM ITR
Rear Disks: OEM ITR
Rear Pads: Ferodo
Rear Lines: Goodridge SS
ITR master brake cylinder
Clutch/Gearbox:
Std B16B S4C Gear Box with LSD
Std Clutch
Std Flywheel
Spodder Inc. Braided Clutch Line
Exterior
JDM "DOHC" "VTEC" door and rear 1/4 decals
JDM plastic headlights
JDM Side Markers
JDM Rear Tail Gate.
JDM Spoiler with breaklight.
JDM Wind Deflectors
Chris_Gee inc. JDM style Rear light conversion.
EP3 "Civic" Badge
Vision Technica Anber Front indicators
No Sunroof
No Bumpstrips
Colour coded door handles And manual mirrors.
Carbon Fibre Bonnet
Interior
Honda-R sticker and tax disk holder.
Fully stripped out shell With minimal Interior:
JDM 96 spec ITR non SRS Steering Wheel
JDM heater controls
JDM Black Cup Holder
JDM Coin Pocket
Black VTi Dash and VTi dials
ITR Titanium Gear knob
EG9 Black Seats with std seatbelts (for now
)Custom Black Plastic Door and rear 1/4 cards
Carbon Fibre Sun Visors
Manual Windows
HKS DB 52mm Oil Temp guage, fitted "pikey" stylee
Spoon Parts Catalogue
Single JDM Spoon style "go-faster" Monkey pushing 90psi !
In-Car Entertainment (ICE):
None B)
Ta muchos!
Chris_Gee
the whole point of the blog is so i dont have to post the same thing on lots of forums.
)
