![]() |
|
|||||||
| Home | Forums | Register | FAQ | Members | Calendar | Gallery | Advertise | Shop | YouTube | Arcade | Search | Today's Posts | Mark Forums Read |
| Nissan - Infiniti Skyline GTR Silvia Fairlady 350z 300z 240sx 200sx Pulsar Sentra Stanza Maxima Altima Versa Rogue G35 G37 Q45 M35 M45 |
| Notices |
![]() |
|
|
LinkBack | Thread Tools | Translate | Search this Thread |
|
|||||||||||||||
|
The rubber seal up top where where sunroof is... I don't believe Nissan sells that anymore, and if they do, it'll cost you around $60 or something like that.
I bought mine a long time ago. As for coilovers, get yourself a set of Stance GR+. Save up the money for it, you won't regret it.
__________________
2.0L Plus Crew - Member # 4 ![]() 18.67 @ 69 mph in the 1/4 mile Rocking da 17x7 +40 chrome Eagle Alloys 245/55/17 for da slip anglez and uber gripz +66mm ride height for da grip like ridin' on railz |
|
|||||||||||||||
|
thanx man, i have heard alot about those stance coilovers. they run about 1200 right? i am going to have to get a cheap replacement for the struts for the time being though and maybe a lowering spring. any suggestions? i guess i will have to figure out something for the sunroof, you think maybe i can go to a junkyard and pick up what i need for the sunroof?
__________________
JDMU EF-Crew Member 03792 240sx fastback (DD) B16 EF9 (for sale) |
|
|||||||||||||||
|
The sunroof situation is weird, because the only thing you can hope for is that, there's somebody's sunroof out there with the rubber in better shape than your's, and that's about it.
I fucked up my install, so it doesn't sit flush, but I can just easily take it off and redo it. Then again, it would be next to impossible to get the silicone off of the inside of the rubber seal, so unless I find something to dissolve that silicone, I'm SOL. As for Stance, yes, their valving is decent, and is actually better than the D2 or K-Sport coilovers out there. BC Racing's coilovers are decent too from what I've heard, but to be honest, if I had to do it again, I'd go Koni 8610s all around with GC coilover kits, and Veilside180sx's housings, and probably Tein camber plates all around. That will run me a little more, but the performance I'll get out of the shocks would be much better than any JDM coilovers out there.
__________________
2.0L Plus Crew - Member # 4 ![]() 18.67 @ 69 mph in the 1/4 mile Rocking da 17x7 +40 chrome Eagle Alloys 245/55/17 for da slip anglez and uber gripz +66mm ride height for da grip like ridin' on railz |
|
|||||||||||||||
|
thanx for the good info guys, went and put my deposit on the car today, so in the next couple of weeks i will be able to show you my new piece......lol
__________________
JDMU EF-Crew Member 03792 240sx fastback (DD) B16 EF9 (for sale) |
|
|||||||||||||||
|
Godspeed stuff are junk.
Unless you just want some cheap POS parts just for the sake of being able to say you have it, don't go near it. If you want cheap coilovers, at the least, get some Megans. If you know someone near you that have a 240 and have Megan coilovers, or Stance, ask them for a ride to see what it's like first.
__________________
2.0L Plus Crew - Member # 4 ![]() 18.67 @ 69 mph in the 1/4 mile Rocking da 17x7 +40 chrome Eagle Alloys 245/55/17 for da slip anglez and uber gripz +66mm ride height for da grip like ridin' on railz |
|
|||||||||||||||
|
i've rode in cars with Ksports, just not a 240, i have been looking at the megan's just for right now, what is a good spring setup? the 12/10 or the 8/6? i want it stiff but not breakback stiff. most of the coilovers i see are 8/6.
__________________
JDMU EF-Crew Member 03792 240sx fastback (DD) B16 EF9 (for sale) |
|
|||||||||||||||
|
The Megans have shitty valving.
The 8/6 will feel stiff for you. The 12/10 is straight up bounce city. Way under damped. Megans cost like $800 or $900 nowadays, I haven't checked because I don't care about them anymore, but if you saved up another couple hundred bucks, there's your brand new Stance GR+ coilovers.
__________________
2.0L Plus Crew - Member # 4 ![]() 18.67 @ 69 mph in the 1/4 mile Rocking da 17x7 +40 chrome Eagle Alloys 245/55/17 for da slip anglez and uber gripz +66mm ride height for da grip like ridin' on railz |
|
|||||||||||||||
|
yeah you right, i want to get my suspension tight first then i will worry about everything else. what about all the other suspension parts, tie rods, LCA's, etc...
what do you recommend for that also, what is a good rim setup with a staggered fitment, right now it has the stock chrome rims with some big tires....lol. sorry for all the questions, but i like to have things planned out so i know which way to go. plus i am a noob to these
__________________
JDMU EF-Crew Member 03792 240sx fastback (DD) B16 EF9 (for sale) Last edited by jaracinghatch; 03-22-2009 at 02:12 PM. |
![]() |
| Bookmarks |
| Tags |
| 240 |
| Sponsored Links |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|